How to install Netem on a TP-Link TL-WR1043ND router with OpenWRT

To use Netem we need to install traffic control (tc).
To do this, we need install the last OpenWRT version (Chaos Chalmer). I tested before on Attitude Adjustment (a previous version) and I couldn't install on it.
To install the last version go to this page and choice your branch (stable or trunk).




















After install the factory and upgrade binary, run the following commands on your router console (throught ssh):

opkg update
opkg install tc iptables-mod-ipopt kmod-sched kmod-netem

A typical netem example is:

tc qdisc change dev eth0 root netem delay 10ms
RTNETLINK answers: No such file or directory

Remember, load netem first:

insmod sch_netem

If you have the same problem, run netem with this format:

tc qdisc add dev eth0 root handle 1:1 netem delay 10ms

Enjoy it!




Comments

Post a Comment

Popular posts from this blog

How to fix Android when developer options are not available for this user

Image
I have an Android One with Oreo version and suddenly my Android rebooted and after that it started to behave strangely: 1) Notification section doesn't work. I can't see notifications from my apps and the arrow and the screw icon to settings access don't work. 2) As I can't access to the notification area, I can't enable Use USB to Transfer Files to access to my phone memory. 3) I can't access to developer mode (I before active it with a lot of taps over Build number). Clicking on developer options just shows developer options are not available to this user. 4) I can't update or install the apps on google play. They freeze on Download pending... message 5) Home and Switch buttons don't work. They light up and vibrate when I tap them but they do nothing. This issue is apparently related to a deconfiguration of user accounts. To fix it, you need re-setup the users. As you can't access to the user manager (you are in guest mode ...
Read more

Exception: Could not find a default OpenFlow controller in Mininet

If you try to run a mininet script like this  , maybe you will get this problem if you are under Ubuntu. Exception: Could not find a default OpenFlow controller  This is trigger because your system don't find a default controller . To enable it just add the first line and add the controller argument to net variable like the second line: from mininet.node import OVSController net = Mininet(topo=topo,host=CPULimitedHost, link=TCLink,controller = OVSController) Now, you will get the following error: c0 Cannot find required executable ovs-controller. Please make sure that it is installed and available in your $PATH: (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin) ovs-controller is a legacy name. You need to be sure that you has it. sudo apt-get install openvswitch-testcontroller sudo cp /usr/bin/ovs-testcontroller /usr/bin/ovs-controller If you run it again, you should kill ovs-testcontroller first to avoid this: Exception: Please s...
Read more

Webcam streaming throught VLC with YUY2 compatibility

If you try to stream your webcam throught VLC you probably will see the following issue: # vlc v4l2:///dev/video0 --sout '#rtp{mux=ts,sdp=rtsp://:8888/live.sdp}'  VLC media player 3.0.4 Vetinari (revision 3.0.4-0-gf615db6332) [000055c7620dd630] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface. [00007ff730002fe0] main mux error: cannot add this stream [00007ff730001180] stream_out_rtp stream out error: cannot add this stream to the muxer [00007ff73000ff60] main decoder error: cannot create packetizer output (YUY2) [00007ff73000ff60] main decoder error: buffer deadlock prevented To fix it, you must enable the transcoding and run the following command: cvlc -vvv v4l2:///dev/video0:chroma=mp2v --v4l2-width 1280 --v4l2-height 720 --sout '#transcode{vcodec=mp2v,acodec=mpga,fps=30}:rtp{mux=ts,sdp=rtsp://:8888/live.sdp}' where chroma enables hardware video decoding. You can edit the resolution, codecs and frame ...
Read more